| 20 LPH | 40 LPH | 60 LPH | 80 LPH |
| 100 LPH | 200 LPH | 300 LPH | 400 LPH |
| 500 LPH | 1000 LPH |
| Particular | Technical Information |
|---|---|
| Input water TDS | 900 ppm (Assumed) |
| Hardness | 400 ppm |
| Flow Rate | 8000 liters/hr. |
| Out put / Reg. | 95000 liters Approx. |
| Type of cylinder | FRP |
| No. of cylinder | One |
| Size | 3672 |
| Valve | Automatic MPV (Multi Port Valve) |
| Size | 1.5” |
| Capacity of Resin :
CATIONS |
1000 liters. |
| Type of Resin | Rechargeable Ion Exchange Resin |
| Operating Pressure | 3.0 – 4.0 Kg/cm2 |
| Regeneration By : | NaCl (Common Salt) |
| Quantity of NaCl | 125 Kgs |
Is your home or Workshop suffering from hard water corrosion? Our NEWater Softener System will create an unlimited supply of water that will feel and act like "soft water" and will stop calcium and lime scaling in your pipes and fixtures caused by hard water.
Basically, water moves through the earth dissolving minerals, holding them in solution as salts, consisting mainly of calcium and magnesium. Most of these salts eventually deposit themselves as scale in your pipes, water heater and other appliances which use water. Scale build-up is the result of a natural crystallization process which is accelerated by heating. The energy loss of trying to heat water through scale is substantial. A one-half inch thick layer of scale in your water heater will retard heat transfer by up to 70 percent! That's costing you money and a good reason why you should be interested.